国内老年人性受视频呀-亚洲一区二区三区激情五丁香-免费久久国产欧美人妻-91麻豆精品久久久久蜜臀

產品展示首頁 > 產品中心 > 涂料檢測設備 > 磨耗儀 > 相控陣探頭【奧林巴斯Olympus】
相控陣探頭【奧林巴斯Olympus】

相控陣探頭【奧林巴斯Olympus】

型    號:
報    價:
分享到:

相控陣探頭【奧林巴斯Olympus】

  • 產品描述

相控陣探頭【奧林巴斯Olympus】
我們制造用于不同檢測應用的各種形狀和尺寸的相控陣探頭。這里用示意圖說明了幾種類型的探頭

相控陣探傷儀探頭【奧林巴斯Olympus】

典型陣列探頭的頻率范圍為1 MHz到17 MHz,晶片的數量范圍為10到128。Olympus提供各種各樣利用壓電復合材料技術的探頭,可進行各種各樣的檢測。本部分說明Olympus的標準相控陣探頭。這些探頭被分為三種類型:角度聲束探頭、整合楔塊探頭及水浸探頭。

其它類型的探頭是根據應用需要而特殊設計的探頭。


 

整合式楔塊和符合規范的探頭

相控陣探傷儀探頭【奧林巴斯Olympus】相控陣探傷儀探頭【奧林巴斯Olympus】

這種組合件將一體化楔塊和符合規范的探頭放置于同一個外殼中,這樣就使探頭和楔塊的組合件具有非常薄的側面,可以用于接觸式角度聲束檢測。由于無需在探頭和楔塊接觸面之間使用耦合劑,因此探頭和楔塊之間的耦合狀態會永遠保持*的狀態。這些探頭可對應力腐蝕裂紋進行手動檢測,還可用于符合AWS和DGS規范的應用,此外,這些探頭還可同時使用40°到70°角度對6.35毫米到19毫米的較厚表面進行手動焊縫檢測(對接接頭、角接接頭、T型接頭)。

    Advantages
  • Probe and wedge in the same housing
  • The lowest-profile probe-and-wedge combination for contact angle beam inspection
  • Coupling always good between probe and wedge interfaces, no need for couplant between the probe and wedge
  • Very small assembly for easy access in restricted areas
  • Inspections of 30° to 70° in steel, SW or LW
  • Easy to handle
  • Probes with an internal wedge can be specially ordered to fit a specific curvature radius.

Typical Applications

  • Manual weld inspection of 6.35 mm to 19 mm (0.25 in. to 0.75 in.) thick surfaces (butt joints, corner joints, tee joints), using 40° to 70° simultaneously
  • Manual inspection of stress-corrosion cracking
  • AWS and DGS code compliant applications

Probe Specifications and Dimensions

Part Number Item Number Frequency
(MHz)
Number of Elements Pitch
(mm)
Active Aperture
(mm)
Elevation
(mm)
Nominal Refracted Beam Angle in Steel Integrated Wedge External Dimensions
mm (in.)
L W H
2L8-DGS1 U8330598 2.0 8 1.0 8.0 9.0 58° SW Yes 27 (1.06) 17 (0.67) 22 (0.87)
4L16-DGS1 U8330597 4.0 16 0.5 8.0 9.0 58° SW Yes 27 (1.06) 17 (0.67) 22 (0.87)
2.25L16-45SW1 U8330014 2.25 16 0.75 12.0 12.0 45° SW Yes 30 (1.18) 15 (0.59) 31 (1.22)
2.25L16-45LW1 U8330495 2.25 16 0.75 12.0 12.0 45° LW Yes 30 (1.18) 15 (0.59) 31 (1.22)
5L16-45SW1 U8330496 5.0 16 0.60 9.6 10.0 45° SW Yes 30 (1.18) 15 (0.59) 31 (1.22)
5L16-45LW1 U8330497 5.0 16 0.60 9.6 10.0 45° LW Yes 30 (1.18) 15 (0.59) 31 (1.22)
2.25L16-AWS1 U8330660 2.25 16 1.0 16.0 16.0 N/A No 25 (0.98) 38 (1.50) 18 (0.71)
These probes come standard with an OmniScan® connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths

 

深穿透型探頭

相控陣探傷儀探頭【奧林巴斯Olympus】

深穿透探頭可與各種楔塊配合使用,進行各種角度聲束的檢測應用。這些探頭于深穿透應用,如對較厚平板、焊縫、鍛件,及多噪聲或晶粒狀材料的檢測。

    Advantages
  • Wave layers with acoustic adaptation to Rexolite®
  • Captive anchoring screws are provided with the probe.
  • A wide selection of wedges is available to suit any angle beam application.

Typical applications

A3, A4, and A5 probes
Deep penetration applications

  • Thick plates and welds
  • Forging
  • Noisy or granular material

相控陣探傷儀探頭【奧林巴斯Olympus】

Probe specifications and dimensions

Part number Frequency
(MHz)
Number of elements Pitch
(mm)
Active
Aperture (mm)
Elevation(mm) External dimensions
mm (in.)
L W H
3.5L16-A3 3.5 16 1.60 25.6 16.0 36 (1.41) 36 (1.41) 25 (0.98)
5L16-A3 5.0 16 1.20 19.2 12.0 36 (1.41) 36 (1.41) 25 (0.98)
1.5L16-A4 1.5 16 2.80 44.8 26.0 57 (2.25) 46 (1.80) 30 (1.19)
2.25L16-A4 2.25 16 2.00 32.0 20.0 57 (2.25) 46 (1.80) 30 (1.19)
2.25L32-A5 2.25 32 0.75 24.0 24.0 29 (1.15) 43 (1.67) 24 (0.96)
5L32-A5 5.0 32 0.60 19.2 20.0 29 (1.15) 43 (1.67) 24 (0.96)

These probes come standard with an OmniScan® connector and a 2.5?m (8.2?ft) cable or can be specially fitted with other connectors and cable lengths.

 

焊縫檢測探頭

相控陣探傷儀探頭【奧林巴斯Olympus】

焊縫檢測探頭的外殼側面很薄且線纜從前面伸出的特點可以避免受到掃查器探頭架的干擾。這些探頭不僅適用于對厚焊縫進行的手動和自動檢測,還適用于對鑄鐵、鍛件、管道、管件、***加工部件和結構部件中的裂縫和焊接缺陷的檢測。

    Advantages
  • Low-profile housing
  • Front-exit cable to avoid interference with the scanner probe holder
  • Fits special PipeWIZARD® wedges designed for automated inspections of girth welds (sophisticated irrigation channels, locking carbide wear pins)
  • Can be ordered with CE-certified Hypertronics connector
  • Suitable for manual and automated inspections
  • Available laterally focused probes improve defect length sizing (7.5CCEV100-60-A16)

Typical applications

  • Automated inspection of girth welds with PipeWIZARD systems
  • Manual or automated inspection of thick welds
  • Detection of flaws and sizing
  • Inspection of castings, forgings, pipes, tubes, and machined and structural components for cracks and welding defects

相控陣探傷儀探頭【奧林巴斯Olympus】

Probe specifications and dimensions

Part number Frequency
(MHz)
Number of elements Pitch
(mm)
Active
Aperture (mm)
Elevation
(mm)
External Dimensions
mm (in.)
L W H
5L60-PWZ1 5.0 60 1.0 60.0 10.0 68 (2.68) 26 (1.02) 30 (1.18)
7.5L60-PWZ1 7.5 60 1.0 60.0 10.0 68 (2.68) 26 (1.02) 30 (1.18)
7.5L60-PWZ1* 7.5 60 1.0 60.0 10.0 68 (2.68) 26 (1.02) 30 (1.18)
5L48-PWZ2 5.0 48 1.0 48.0 10.0 56 (2.20) 26 (1.02) 30 (1.18)
5L32-PWZ3 5.0 32 1.0 32.0 10.0 40 (1.57) 26 (1.02) 30 (1.18)
7.5L32-PWZ3 7.5 32 1.0 32.0 10.0 40 (1.57) 26 (1.02) 30 (1.18)
10L32-PWZ3 10.0 32 1.0 32.0 10.0 40 (1.57) 26 (1.02) 30 (1.18)
7.5CCEV100-60-A16 7.5 60 1.0 60.0 18.0 68 (2.68) 29 (1.14) 30 (1.18)
7.5CCEV100-60-A16** 7.5 60 1.0 60.0 18.0 68 (2.68) 29 (1.14) 30 (1.18)
These probes come standard with an OmniScan® connector and a 2.5?m (8.2?ft) cable or can be specially fitted with other connectors and cable lengths.

 

近壁探頭

相控陣探傷儀探頭【奧林巴斯Olympus】

近壁探頭的兩端具有較短的盲區(*晶片的中心和zui后晶片的中心到與它們zui近的探頭外殼邊緣的距離是1.5毫米)。 它們可以*地適用于復合材料的通道檢測,并用于復合材料的C掃描檢測(分層、脫膠和多孔性)。

Advantages

  • Shortened dead zone at both ends (1.5 mm between center of first or last element and housing edge)
  • Well suited for composite channel inspections
  • Used for C-scan inspections of composites (delamination, disbonding, and porosity)

Probe Specifications and Dimensions

Part Number Item Number Frequency
(MHz)
Number of Elements Pitch
(mm)
Active Aperture
(mm)
Elevation
(mm)
External Dimensions mm (in.)
L W H
3.5L64-NW1 U8330148 3.5 64 1.0 64.0 7.0 66 (2.60) 19 (0.75) 25 (0.98)
5L64-NW1 U8330134 5.0 64 1.0 64.0 7.0 66 (2.60) 19 (0.75) 25 (0.98)
3.5L24-NW2 U8330965 3.5 24 1.0 24.0 7.0 26 (1.02) 19 (0.75) 30 (1.18)
5L24-NW2 U8330155 5.0 24 1.0 24.0 7.0 26 (1.02) 19 (0.75) 30 (1.18)
3.5L128-NW3 U8330695 3.5 128 1.0 128.0 7.0 130 (5.12) 21 (0.83) 35 (1.38)
5L128-NW3 U8330647 5.0 128 1.0 128.0 7.0 130 (5.12) 21 (0.83) 35 (1.38)
These probes come standard with an OmniScan® connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths.


 

通用型探頭

相控陣探傷儀探頭【奧林巴斯Olympus】

用途廣泛的各種探頭與楔塊組合在一起的側面極薄,可以較為容易地進到空間狹小的區域。這些探頭可以和多種楔塊一起使用,進行各種角度聲束檢測應用。這些探頭不僅用于對6.35毫米到38毫米的較厚焊縫進行手動或自動檢測,還可對鑄鐵、鍛件、管道、管件、***加工部件及結構部件的裂縫和焊縫缺陷進行檢測。


 

Probe Specifications and Dimensions

 

Part Number Item Number Frequency
(MHz)
Number of Elements Pitch
(mm)
Active Aperture
(mm)
Elevation
(mm)
External Dimensions
mm (in.)
L W H
5L16-A10 U8330595 5.0 16 0.60 9.6 10.0 23 (0.91) 16 (0.63) 20 (0.79)
10L32-A10 U8330251 10.0 32 0.31 9.9 7.0 23 (0.91) 16 (0.63) 20 (0.79)
5L32-A11 U8330274 5.0 32 0.60 19.2 10.0 25 (0.98) 23 (0.91) 20 (0.79)
5L64-A12 U8330593 5.0 64 0.60 38.4 10.0 45 (1.77) 23 (0.91) 20 (0.79)
5L60-A14 U8330785 5.0 60 1.0 60.0 10.0 68 (2.68) 23 (0.91) 20 (0.79)
7.5L60-A14 U8330804 7.5 60 1.0 60.0 10.0 68 (2.68) 23 (0.91) 20 (0.79

線性陣列探頭是工業應用中zui常用的相控陣探頭。定義相控陣探頭的一個重要因素是探頭的激活孔徑。

小腳印探頭

相控陣探傷儀探頭【奧林巴斯Olympus】

小腳印探頭可進入到活動空間狹窄的區域(A00探頭的腳印尺寸為8×8毫米)。

    Advantages
  • Access to confined areas (A00 probe has an 8 × 8 mm footprint)
  • Cable connector can come out from either the side or the top
    (A0 only).
  • Special-design small-footprint wedge
  • 10L16-A00 is used for aerospace scribe-mark applications.

Probe Specifications and Dimensions

Part Number Item Number Frequency
(MHz)
Number of Elements Pitch
(mm)
Active Aperture
(mm)
Elevation
(mm)
External Dimensions mm (in.)
L W H
5L10-A0-SIDE U8330080 5.0 10 0.60 6.0 6.0 13 (0.51) 10 (0.39) 23 (0.91)
5L10-A0-TOP U8330075 5.0 10 0.60 6.0 6.0 13 (0.51) 10 (0.39) 23 (0.91)
10L10-A0-SIDE U8330110 10.0 10 0.60 6.0 6.0 13 (0.51) 10 (0.39) 23 (0.91)
10L10-A0-TOP U8330111 10.0 10 0.60 6.0 6.0 13 (0.51) 10 (0.39) 23 (0.91)
7.5CCEV35-A15 U8330826 7.5 16 0.50 8.0
聯系人:劉浩宇
手機
13524456758
電話
86-021-56374192,56615309
點擊這里給我發消息
 

環保在線

推薦收藏該企業網站
91在线国内在线中文字幕| 国产精品久久香蕉国产线| 欧美丰满人妻少妇精品| 91亚洲熟女少妇在线观看| 久久99青青精品免费观看| 日本高清加勒比免费在线| 成人国产激情在线视频| 国产人妻熟女高跟丝袜| 一个人的久久精彩视频| 无套内射美女视频免费在线观看| 草草视频精品在线观看| 免费观看一区二区三区黄片| 91免费精品国自产拍偷拍| 国产日产欧美精品视频| 在线精品首页中文字幕亚洲| 成人精品视频一区二区在线观看 | 黑人巨大精品欧美一区二区区 | 午夜福利精品视频视频| 日韩欧美好看的剧情片免费| 国产精品日本女优在线观看| 一区二区三区日韩在线| 韩国日本欧美国产三级| 亚洲国产精品久久琪琪| 久久夜色精品国产高清不卡| 久久精品福利在线观看| 欧美午夜一级艳片免费看| 亚洲欧美日本成人在线| 午夜传媒视频免费在线观看| 99久久精品午夜一区二区| 九九九热视频最新在线| 91福利免费一区二区三区| 少妇肥臀一区二区三区| 色哟哟国产精品免费视频| 亚洲欧美日韩在线中文字幕| 色综合伊人天天综合网中文 | 欧美特色特黄一级大黄片| 中文字幕一二区在线观看| 日韩女优视频国产一区| 久久国内午夜福利直播| 人妻熟女中文字幕在线| 午夜福利网午夜福利网|